Propagating hoyas: stem cuttings in water or in mix, and layering

Published 3 October 2026Not yet reviewed by the editor8 sources

Short answer

Hoyas root readily from stem cuttings [2]. The RHS describes rooting cuttings from the previous year's stems in a glass of water, with roots expected in two to three weeks, before the cuttings are moved into cuttings compost [1]. A rooting medium such as perlite or a soil-free mix is the alternative; Illinois Extension warns that roots grown in water are often weak and can struggle after potting [6]. Layering, rooting a stem in a pot while it is still attached to the parent, is the other method the RHS describes [1].

Three ways to make a new hoya

NC State Extension notes that most hoya species are easily propagated by stem cuttings [2]. The RHS describes two home methods, layering and semi-ripe cuttings, both best done in spring or early summer [1]. NParks Singapore lists seed, leaf cuttings and stem cuttings as propagation methods for Hoya kerrii [4], although seed is rarely available to home growers.

Whichever method you use, wear gloves: the RHS warns that the milky sap is a skin irritant [1].

Choosing and cutting the stem

  • Start with a healthy plant. Penn State advises using parent plants that are free of disease, insects and stress [7], and Maryland Extension says cuttings should only be taken from healthy tissue when a plant has had root rot [8].
  • Use last year’s growth. The RHS recommends semi-ripe cuttings from the previous year’s stems [1].
  • Include nodes. A node is where a leaf joins the stem, and it is where roots and shoots form. Illinois Extension suggests stem cuttings of about 3–6 inches (8–15 cm) with at least two and no more than six nodes [5].
  • Clean tools. Penn State recommends sharp, clean tools and sterilized media [7].
  • Remove flowers. Illinois Extension advises removing any flowers from a cutting so it can put its energy into rooting [5]. On a hoya, take cuttings from stems without spurs if you can, since spurs left on the parent plant will flower again (see the peduncle guide).

Rooting in water

In the RHS approach the cuttings simply go into a glass of water. Roots typically appear within two to three weeks; once the root system is well developed, the cuttings are moved into peat-free cuttings compost, which is kept generously watered while they settle [1]. The advantage is that you can watch the roots form.

The drawback is the move into potting mix. Illinois Extension cautions that rooting in water does not suit every houseplant: the roots formed in water are often feeble, and such cuttings tend to struggle once they are moved into soil. It also suggests changing the water whenever it goes cloudy [6]. The RHS does not raise this concern for hoyas, so treat it as a general caution rather than a hoya-specific finding.

Rooting in a medium

The alternative is to root the cutting directly in a rooting medium. Illinois Extension describes the medium’s job as holding the cutting in place, suggests perlite, vermiculite or a soil-free potting mix, and warns that a medium kept too wet can cause rot [6]. Penn State lists perlite, bark and sand among suitable materials because they drain and aerate well, and advises against compost and garden soil, which can carry pathogens and are heavy and poorly aerated [7].

Practical points from the extension guides:

  1. Moisten the medium first and make a hole with a pencil; remove leaves that would sit below the surface [5].
  2. Rooting hormone can speed rooting, but use only a little; too much slows it [7].
  3. Cover the pot with a clear plastic bag to keep humidity high, and keep it in bright light without direct sun, which can burn cuttings under plastic [6].
  4. Pot the cuttings individually when the roots are about one inch (2.5 cm) long [5].

Water or medium: which should you choose?

No institutional source we found compares the two methods for hoyas directly. The RHS describes water rooting for hoyas and expects roots in two to three weeks [1]; Illinois Extension prefers a medium for houseplants in general because of the weak-root problem [6]. If you root in water, pot the cutting up once it has a good set of roots and keep the new pot evenly watered while it adjusts, as the RHS advises [1]. If you root in a medium, the main risk is keeping it too wet [6].

Layering: rooting a stem while it is still attached

Layering lets a stem root while it is still fed by the parent plant. Following the RHS outline [1]:

  1. Set a second pot of peat-free cuttings compost beside the plant.
  2. Pick a vigorous stem that hangs low enough to reach it, lay it across the new pot and pin it to the surface of the compost.
  3. Strip off any leaves that would be buried or touch the compost.
  4. Do not let the compost dry out while roots are forming.
  5. Once the new roots are well established, sever the stem between the two pots.

Because the stem stays attached until it has rooted, it is never without a water supply while the roots form.

The single-leaf problem

Hoya kerrii is often sold as one rooted heart-shaped leaf. NC State Extension says such cuttings rarely grow well unless some stem tissue was cut along with the leaf [3]. If you want a vining plant, start from a stem cutting with at least one node. Illinois Extension notes, for houseplants generally, that a leaf cutting must produce both roots and shoots and usually takes longer to make a plant than a stem cutting [5].

Questions

Will a single hoya kerrii leaf grow into a plant?

Usually not. NC State Extension notes that sweetheart hoyas are often sold as a single rooted leaf, and that such cuttings are unlikely to grow well unless a bit of stem tissue was included with the leaf [3].

When is the best time to take cuttings?

The RHS recommends spring or early summer for both layering and cuttings [1]. Illinois Extension notes that stem cuttings of houseplants are usually taken during active growth in spring or summer, though other months can work [5].

Species mentioned

Related guides

Sources

  1. How to grow hoya. Royal Horticultural Society. Layering and semi-ripe cuttings rooted in water; timing; sap. Accessed 30 September 2026.
  2. Hoya (Plant Toolbox, genus page). NC State Extension. Most species easily propagated by stem cuttings. Accessed 30 September 2026.
  3. Hoya kerrii (Plant Toolbox). NC State Extension. Single-leaf cuttings rarely grow unless stem tissue is included. Accessed 30 September 2026.
  4. Hoya kerrii (Flora & Fauna Web). National Parks Board, Singapore. Propagation methods listed for H. kerrii. Accessed 30 September 2026.
  5. Cuttings (Houseplants). University of Illinois Extension. Nodes, cutting length, rooting time, when to pot up. Accessed 1 October 2026.
  6. Winter gardening: propagating houseplants to beat the winter blues (Good Growing blog, 21 February 2025). University of Illinois Extension. Water-rooted cuttings often have weak roots; rooting media; humidity. Accessed 1 October 2026.
  7. Propagating Houseplants. Penn State Extension. Rooting media, clean tools, healthy parent plants, rooting hormone. Accessed 1 October 2026.
  8. Root Rots of Indoor Plants. University of Maryland Extension. Take cuttings only from healthy tissue. Accessed 1 October 2026.